Gesong Enterprises - Tecformer with 2 tables

All New Design | High Quality | Safely Operation | Easy Repair | Reasonable Price
GESONG 2005 TWO TABLES TECFORMER - Vacuum Forming Machine

We are proudly introducing the new Tecformer 2005 model - two tables. Tecformer is a 3-Dimensional thermoplastic foils for vacuum and membrane pressing machine. The functions of the new redesigned Tecformer are even more advanced. The performance of our machine is better then the old model. The control panel is now improved into a computer console with touch screen, which helps you to control the time and temperature more precise. The two work top platforms will increase the speed of production line. Our Tecformer can easily apply decorative sheets and films with heat-seal adhesive films to almost any shape of wood, medium-density fiber boards (MDF), particle boards, carvings, drawer panels, moldings, kitchen cabinet doors, entrance doors, window sills and plagues.

Main Dimension:

Model	GDT 4x4 Two Tables	GVF 4x8 Two Tables
Work top Platform	(1300 x 1435 mm) x 2	(1300 x 2630 mm) x 2
Power Required	380V 45A3Ø	380V 100A3Ø
Machine Size	3455 x 1850 x 1843 mm	6720 x 1850 x 1843 mm

Tech Data of Tecformer:

Displacement:	128 (m3/hr)
Ultimate Pressure:	0.5 (mbar)
Motor Power:	3KW (4HP)
Pump Speed:	1700 (r.p.m)
Noise Lever:	71 (dB)
Oil Capacity:	2.5 (liter)
Inlet Connection:	1-1/2 (inch)
Weight of Pump:	90kg

Main Features:
1. Two work top platforms can increase production efficiency.
2. Variable adjustment for vacuum forming pressure and timing.
3. Hold-on control can eliminate wrinkling.
4. Automatic timer control makes operation easy and safe.
5. Can produce differently sized and shaped panels at same time.
6. Simple molds are easy to manufacture and change.
7. Movable working bench can transfer products automatically
8. PVC sheets can be fixed automatically at one time.
9. Automatic sensor can keep temperature stable to ensure the quality of the products.
10. Quick heating quartz tubes can increase production efficiency.

Suitable for:
1. Producing flexible PVC sheets, rigid sheets, & PS wood veneers.
2. Tecformer can form with wood, metal, plastic, etc.
3. Can form with PVC sheet or with membrane.
4. Tecformer produces are suitable for furniture, cabinets, kitchen equipment, office table tops,
doors, and especially for products with embossed panels.

The Well-Known Tecformer Systems:
A. Forming with no rubber sheet (Membrane)
You can use this 3-Dimensions system when profile is extremely intricate or in very precise details. Provide you with an experienced seal system where membrane work is made by foils itself. You can use different foil materials such as ABS, PVC, PP, and so on.

B. Forming with a rubber sheet (Membrane)
You can use material such as veneer or paper in 2-Dimensions, also it could be used with a wide range of 3-Dimensions Tecformer performing.

Operation Brief Procedure:

1. Raise the frame, and place products on the platform.
2. Place a PVC film over the entire platform surface, and make sure the film has covered the edges
of the frame.
3. Load down the frame, and start heating till the film has been heated sufficiently, then begin forming.
4. Raise the frame, and the finished products on the platform are ready for you.
5. Now repeat these processes on the left-hand table.